Featured Products

Stainless Steel Switchgear For Investment Casting In Silicone Solvents
ASTM A351M/A743M CF8M (EN10213/EN10283 1.4408) CF8M material is austenitic stainless steel, due to the molybdenum content significantly improved wear resistance to reducing media and a variety of organic acids, alkalis, salts. Resistance to intergranular corrosion is better, used in chemical equipme...
View More
Silica-Sol Investment Casting Tin-Bronze Impellers
ASTM B584 C92200/C90500 Tin bronze is very resistant to corrosion in the atmosphere, seawater, fresh water and steam, and is widely used in power generating sets, shipbuilding, desalination, nuclear and petrochemical equipment, steam boilers and marine ship parts.
View More
Silica-Sol Investment Casting Tin-Bronze Impellers
ASTM B584 C92200/C90500 Tin bronze is very resistant to corrosion in the atmosphere, seawater, fresh water and steam, and is widely used in power generating sets, shipbuilding, desalination, nuclear and petrochemical equipment, steam boilers and marine ship parts.
View More
Sand Cast Coal Miner Tooth Crowns
GB/T5680 ZGMn13Cr2 ASTM A128M C,D,E1,E2 Widely used in mining, quarrying and civil construction industries.
View More
Double Suction Impeller
ASTM A890M/A995M 1B, 3A, 4A, 5A, 6A, (EN10213/EN10283, 1.4470, 1.4469) Has excellent toughness and weldability. High strength and good resistance to chloride stress corrosion Good resistance to corrosion fatigue and wear corrosion performance. Widely used in oil refining, chemical service, paper mak...
View More
Precision Cast Machining Impellers
ASTM A487/A487M-2012 CA6NM (EN10213/EN10283 1.4317) CA6NM super martensitic stainless steel has good corrosion resistance, weldability, high strength and good toughness at low temperatures. CA6NM super martensitic stainless steel, often used as a hydropower steel, is a popular choice for water turbi...
View More
Double Suction Cast Iron Pump Body
ASTM A48M CL35B (ISO185-250) (EN1561-GJS-250) (GB9439-HT250) Usually used to manufacture parts for all kinds of medium and small clear water pumps, such as pump bodies, impellers, bushings, etc. It has good corrosion resistance to concentrated sulphuric acid.
View More
Ductile Iron Volute Double Suction Pump Body
ASTM A395M 60-40-18 Ferritic Ductile Iron, EN1563-GJS-400-18RT/LT This material has higher strength, elongation and impact values than malleable iron. It has a high capacity to withstand high energy impact loads at room temperature, and its small energy multiple impact resistance at both room temper...
View More
Precision Casting And Machining Of Worm-Shaped Pump Bodies
GB/T 2100 ZG07Cr19Ni11Mo2 Austenitic stainless steel ASTM A351/A743 CF8M (EN10213/10283 1.4408) Good plasticity, toughness, cold transformation, welding process performance,, corrosion resistance, especially excellent pitting resistance. Suitable for use in seawater in applicable equipment, the chem...
View More
Impact Wear Resistant High Manganese Steel Mill Wall
GB/T5680 ZGMn13Cr2/ZGMn18 ASTM A128M C,D,E1,E2 Widely used in mining, quarrying and civil construction industries.
View More
Impact Wear Resistant High Manganese Steel Cone Crushing Wall
GB/T5680 ZGMn13Cr2/ZGMn18 ASTM A128M C,D,E1,E2Widely used in mining, quarrying and civil construction industries.
View More
Lost Wax Silica Sol Investment Casting Impeller
BS3100-332C13 332C13 is an Fe-Cr-Ni-Cu-Ni-Mo alloy with a dual ferrite and austenitic structure. The moderate high strength and hardness, together with good ductility and impact properties, give the alloy excellent resistance to wear or corrosion. A890 1A offers significantly better resistance to st...
View More

About Power Cast

Coming From China, Marketing To The World

Founded in 1991, Beipiao Power Steel Casting Co., Ltd. is a professional Chinese Duplex Stainless Steel Casting Supplier and SULZER Duplex Casting Manufacturer integrating research and development, casting, machining and sales. Our company has gained “TüV” NORD CERT GmbH Certificate, ISO9001 quality system certification and other certificates.

View More

Company History

2002

In September, it passed the German "TüV" ISO9001 quality system certification, and on October 1, 2017, it was upgraded to ISO9001:2015 quality system certification.

2003

In cooperation with SULZER Sulzer Group, it has been 15 years since it was awarded "Excellent Vendor" by Sulzer Group in 2009 and 2011.

2008

Through the Environmental Protection Agency of the State Environmental Protection Agency.

2011

Stainless steel pump valve product technology was rated as "specialized new" product by Liaoning Province; The stainless steel smelting technology was awarded the municipal science and technology progress award.

2014

In June, the audit was completed and entered the national casting industry enterprise access list.

2015

Member of China Foundry Association

2015

May passed German PED (2014/68/EU) & AD2000 system and material certification.

2017

In April passed the PED (2014/68/EU) welding procedure qualification certification.

2017

In 2017, the company’s R&D center was assessed as a provincial technology R&D center.

2017

ASME IX coil welding process assessment in November 2017.

2017

Status Quo of Occupational Hazards Approved in December 2017.

2018

Completion of enterprise safety standardisation certification.

Why Choose Us

Powder metallurgy production Cobalt-chromiun alloy products, one of the three global suppliers.

Our faith is that the quality and customer's demands are always the important thing for everyone in our company.

Leaders in PM Cobalt-chromium Alloy

16 years in producing cobalt alloy parts and 10 years exporting experience. Providing professional solutions for wear issues and products.

R&D team

There are 5 engineers with more than 20 years of professional experience in our R&D team, and we are confident to turn your ideas or drawings into real products.

Production capacity

SYTOP control the core technology of Cobalt-chromium Alloy powder metallurgy, also we have casting and forging plant to meet your various request of Cobalt-chromium Alloy .

Quick & efficient service

More than 90% of our Duplex Stainless Steel Casting exported to North America and Europe, quality assurance, quantitative and flexible.

News Media

What are the aluminum casting processes

Jun 29,2020

Complicated Duplex Sand Casting aluminum casting is a new technology that uses electromagnetic pump low-pressure casting technology as the core, aluminum smelting and forming compound purification technology and manufacturing core new technology to produce high-quality die castings. The electromagnetic pump low-pressure casting metal melt transfer system has a stable flow, convenient flow control, eases the back suction of molten alumina, and is easy to implement. The advantages are the automat...

View More

What is the working process of metal parts processing

Jun 22,2020

After a certain SULZER Chinese Sand Casting Supplier development trend in metal machining, all patterns have become quite rigorous, especially in the requirements of precision alloy machining. In order to avoid the situation of workpiece scrapping when machining hardware products, metal machining manufacturers Machining drawings, materials, machining technology and other conditions have all paid more attention to the corresponding preparations to improve production efficiency.So what are the pro...

View More

What is the starting point of powder metallurgy hot pressing technology

Jun 16,2020

When  powder metallurgy enterprises perform metal powder injection molding, in addition to preparing the corresponding powder required for processing, they also need to add more binders to the powder. Therefore, both powder and binder should meet the requirements, otherwise it will affect the forming of powder metallurgy products.Among them, the powder needs to use ultra-fine near-spherical powder  and from mixing to degreasing and sintering. The process is more complicated and the process requi...

View More

How is the special shape of cast steel blade processed

Jun 09,2020

At present, many SULZER Sand Casting Supplier turbofan engines still use the more mature titanium alloy damping fan blades. The narrow and long structure of this blade profile makes its weak rigidity in the form of thin-walled structure in the direction of the basin back more prominent. The poor rigidity of the structure and the large surface area of the profile, the nature of the material being difficult to process, have an adverse effect on the traditional machining process, which is intuitive...

View More

What are the complex aluminum casting processes

Jun 01,2020

Complicated aluminum Stainless Steel Casting casting is a new technology that uses electromagnetic pump low-pressure casting technology as the core, aluminum smelting and forming compound purification technology and manufacturing core new technology to produce high-quality die castings.melting and melting of aluminum. Smooth transition aluminum metal halide lamp,the size and stability of the mold and core process.The electromagnetic pump low-pressure casting metal melt transfer system has a stab...

View More

What is the difference between powder metallurgy and CNC processing

May 25,2020

It is found  from the finished products that the shapes of products made by NC machining and powder-metallurgy are similar, but it is obvious that the price of NC machining is more expensive than powder-metallurgy, so why not use powder metallurgy to make products? It seems that there is still a difference between powder-metallurgy and CNC machining.Powder metallurgy is a process technology for preparing metal powder or using metal powder as raw material, after forming and sintering, manufacturi...

View More

What are the characteristics of the complex aluminum casting process

May 18,2020

Complicated  aluminum casting is a new technology that uses electromagnetic pump low pressure casting technology as the core, aluminum smelting and forming compound purification technology and manufacturing core new technology to produce high-quality die castings. The electromagnetic pump low-pressure casting metal melt transfer system has a stable flow, convenient flow control, eases the back suction of molten alumina, and is easy to implement. The advantages are the automation of the use proce...

View More

What kind of tool is used to machining stainless steel material

May 12,2020

We all know that stainless steel Alloy Steel Casting is a difficult material to process, has a large work hardening tendency, high high temperature strength, and increased shear stress in the shear slip zone, so that the total cutting resistance is increased, thereby increasing tool wear. Therefore, it is very important to choose the right stainless steel processing tool. Wrought by  turning tools,  hardness  wear resistance is second only to , but its use strength is high, can withstand large ...

View More

What are the processing characteristics of cold deformed die steel

May 07,2020

With the development of the Stainless Steel Casting mechanical machining industry, more and more parts are produced by cold work dies in production, and more and more types of cold deformation dies are used. Cold volume die such as stretching, blanking, trimming, punching material rolling . Although there are many types of cold deformation molds, different working conditions and different performance requirements, the basic working conditions are similar: that is, the metal is deformed in the co...

View More

What is the forgeability of metal materials

Apr 27,2020

The factor that has a greater Duplex Sand Casting influence on the forgeability of the metal is the shaping of the metal itself. The better the plasticity, the less likely it is to crack during forging. The plasticity of a metal is closely related to the structure of the metal. The finer the crystal grains, the more uniform the structure and the better the plasticity. Therefore, the forgeability of the metal can be improved by refining the crystal grains and the uniform structure. The metal mate...

View More

What kind of tools are used to process stainless steel materials

Apr 20,2020

We all know that stainless steel is a difficult material to process, has a large work hardening tendency, high high temperature strength, and increased shear stress in the shear slip zone, so that the total cutting resistance is increased, thereby increasing tool wear. Therefore, it is very important to choose the right stainless steel processing tool. Wrought by turning tools, hardness  wear resistance is second only to W1, but its use strength is high, can withstand large impact load, suitable...

View More

The advantages and disadvantages of electroforming

Apr 13,2020

Advantages of electroforming 1. Can perform ultra-precision processing (good replication accuracy). The most important feature of electroforming is that it is highly "realistic". Electroforming can even replicate metal wires below 0.5 microns. For example, a high-precision metal mesh (ultra-fine metal mesh) for a television camera with 2,500 3.5-micron ultra-fine wires in a width of 1 inch is produced by electroforming. The cigarette filter fiber is also made of cellulose through an ultra-fine m...

View More

Global Network